DRAABE is a production company based in Hamburg. The family company is based on seven decades of tradition in technical apparatus construction. Today, humidification systems and water treatment systems are sold worldwide under the DRAABE brand. Along with sailing, vinyl is one of the owner's passions.

In 2011, DRAABE Technologies GmbH was found and has been developing record washing machines ever since. The "NESSI Vinylmaster" is one of the best-selling devices today and is sold worldwide through distributors.

All DRAABE machines are characterized by a timeless, high-quality design, user-friendliness and high operational reliability. 

 

Nessie Vinylmaster Reference

 

The NESSIE Vinylmaster Reference washes and dries records on both sides in one operation. The difference to the NESSIE Vinylmaster Advance is that you do not need to turn the record over to clean the second side.

Four microfiber pads clean the record intensively and gently. The interactive display of the machine guarantees the easiest operation. Proven long-life motors and a powerful automatic suction system ensure the best possible washing results.

Two tanks are integrated into the machine: a storage tank for the cleaning liquid and a separate tank for the dirty water. This means that washing is always done with fresh cleaning solution. Both tanks are electronically monitored.

The machine has separate pumps for dosing the upper and lower sides. This enables the necessary supersaturation on the downward facing side of the plate. So here is also properly washed and not just damp wiped.

Unlike simply constructed machines, the NESSIE Vinylmaster Reference has two separate functional units for washing and suction. This brings many advantages to the user, but above all a better washing result.

Functional overview

- Single button operation with interactive color display
- Language may be chosen when initilizing the machine
- 3 wash programs selectable (Normal, Intensive and Manual)
- Display of washing time, number of records washed, etc.
- Monitoring of the filling levels of both tanks
- Washing arms with microfiber technology
- Electrostatic discharge through grounded center mandrel
- Automatic liquid application in exactly the right quantity
- Separate dosing pumps for upper and lower side
- Manual re-dosing possible at any time
- Automatic change of rotation direction LEFT/RIGHT
- Automatic suction starts and stops automatically when the suction arm is put
in place
- Mechanical locking of the functional arms
- No clamp, but solid chrome-plated puck with label seal and magnetic power
support
- Housing made of water-resistant, deep black carbon acrylic
- Basotect® noise insulation in the housing
- Separate fresh water tank made of PVC for the cleaning liquid
- Dirty water is drained via a practical drain hose, practically magnetically fixed
under the front of the unit
- Outstanding manufacturing quality "Made in Germany
- CE certification
 

Nessie Vinylmaster Advance

 

The NESSIE Vinylmaster Advance combines innovative microfiber with classic brush cleaning. The interactive display of the machine guarantees easy operation. Proven durable motors and a powerful automatic extraction system ensure the best possible washing result.

Two tanks are integrated into the machine: a storage tank for the cleaning fluid and a separate tank for the dirty water. So it is always washed with fresh cleaning solution. Both tanks are electronically monitored.

The NESSIE Vinylmaster Advance is 100% based on the top model NESSIE Vinylmaster Reference. The difference is that you turn the record over once to clean the second side. Unlike a simple machine, the NESSIE Vinylmaster Advance has two separate functional arms for washing and vacuuming. This brings the user many advantages, but above all a better washing result.

Functional Overview:

- One-button operation with interactive colour display
- 3 washing programs selectable (Normal, Intensive and Manual)
- Display of washing time, number of washed records, etc.
- Monitoring of the fill levels of both tanks
- Combi washing arm with microfibre technology and classic brush
- Electrostatic discharge by grounded central mandrel
- Automatic cleaning agent application via the washing arm in exactly the right
quantity
- Manual re-dosing possible at any time.
- Automatic rotation direction change LEFT/RIGHT
- Automatic suction starts and ends automatically when the suction arm is
attached.
- Mechanical locking of the function arms
- No clamp, but solid puck with label seal
- Housing made of water-resistant, deep black carbon acrylic
- Turntable with wipeable and antistatic foam rubber pad
- Extremely quiet extraction by Basotect® sound insulation
- Separate fresh water tank made of PVC for the cleaning liquid
- Dirty water is emptied via a practical drain hose, practically magnetically
fixed under the front of the device.
- Excellent manufacturing quality "Made in Germany"
- CE certification.

 

Nessie Vinylcleaner Pro Plus +

 

 

The Nessie Vinylcleaner ProPlus+ is the further development of the Nessie Vinylcleaner Pro record washing machine. All machines in the Vinylcleaner series are manufactured in Germany. They are reliable and used by record lovers all over the world. The Nessie Vinylcleaner ProPlus + has all the functions of the Nessie Vinylcleaner Pro, but also has an electric dosage and a microfiber brush.

The cleaning liquid is poured into the tank built into the device. The filling opening is on the front left of the device. A funnel is included for filling. The cleaning liquid is dosed into the double brush at the push of a button.

Vinylcleaner Pro Plus+ is equipped with two brushes: a microfiber brush and a NESSIE premium brush. Both brush heads are movably (swinging) suspended and thus adapt to the unevenness of the record. The premium brush is made from the finest, abrasion-free fibers in industrial quality. It is industrially manufactured in a traditional company in Germany in the Black Forest. The additionally installed microfiber brush distributes the liquid evenly and supports cleaning with microfiber technology.

In particular, users who wash a lot of records will appreciate the advantage of a permanently installed brush. It is tiring to keep the washing brush in the correct position for a long time. Usually this leads to the washing time being shortened or liquid getting onto the just dried back.

The heart of the Nessie Vinylcleaner ProPlus + is the suction technology of its big brother, the "Nessie Vinylmaster". The same motors are installed and no compromises are made. The electronic control of the suction also corresponds to that of the Vinylmaster. The contact pressure during suction is therefore never closed This is a common problem of supposedly "powerful" machines from the Far East.

The case is made of 8 mm deep black acrylic and the platter is made of satined acrylic. Chrome-plated design and functional elements make the machine a real eye-catcher.

The elegant puck made of hard chrome-plated aluminum is also unique in this class. It has a rubber lip seal on the underside that protects the label from getting wet during hand washing. It seals without screws or clamps just by its own weight.

The in-house cleaning agent "Nessie Vinylin" is supplied in a practical 500 ml spray bottle, which enables the washing machine to be easily filled. The automatic change of direction of rotation supports the high cleaning effect.

Dynamic washing through automatic change of direction of rotation The direction of rotation of the turntable changes automatically every 2 revolutions. This creates a dynamic washing operation without the user having to operate switches.

The Nessie suction is quiet and residue-free. When the drying arm is put onto the plate, suction begins and all dissolved impurities are drawn deep out of the groove. The suction power adapts automatically. The suction ends automatically after 1 revolution change. The "residual strips" that are common with many flat vacuum cleaners do not exist with this Nessie Vinylcleaner .

The device is manufactured in a qualified factory in Seevetal near Hamburg. The case is made of deep black carbon acrylic. The high-quality look is underlined by elegant chrome and stainless steel elements. All devices have been tested and certified in accordance with the strict test regulations of the EU Machinery Directive.

The Nessie Vinylcleaner Pro record washing machine is protected against electrostatic charges in several ways, including the earthing of the record mandrel, the metal supports on the side and an antistatic turntable support. The "Vinylin" cleaning fluid is also antistatic.

The devices have an LED illuminated button that uses a timer to indicate the recommended minimum washing time. So you always use the correct washing time even with several plates

The devices are fully soundproofed from Basotect, a high-quality soundproofing material from Bayer. This insulates the noise of the turbine to values < below 60 dB.

The machine is equipped with two brushes: a microfiber brush and a NESSIE premium brush. Both brush heads are movably (swinging) suspended and thus adapt to unevenness of the record. The additionally installed microfiber brush distributes the liquid evenly and supports cleaning with microfiber technology. Result: A quick and thorough cleaning across the entire width of the record.

 

Nessie Vinylcleaner Pro

 

The plate washing machine "Nessie Vinylcleaner PRO" is based on the basic model "Nessie Vinylcleaner". In the heart, however, beats a lot of technology of the big brother, the "Nessie Vinylmaster".
A high-quality brush arm is mounted on the front right of the machine. This brush arm makes plate washing much easier. It is simply swung onto the record. The brush is suspended swinging and automatically adapts to unevenness of the record. Vinyl listeners who have washed their records wet with a hand brush know these problems:

  • Holding the brush by hand is exhausting, especially if more than 1 plate is to be washed. The result is that it is usually washed too short and the result remains unsatisfactory.
  • It is almost impossible to guide the brush by hand so that it does not get over the edge of the record. If this happens only once, you have cleaning liquid on the back again, which you may have just dried before.

With the Nessie brush arm, the above difficulties are avoided. The record is thoroughly cleaned over the entire width without having to hold a hand brush.The brush consists of the finest polyamide carbon fibers of the highest quality from a brush factory in the Black Forest. The in-house cleaning agent "Nessie Vinylin" is supplied in a practical 200 ml spray bottle, which allows easy application of the cleaning solution to the record.

In the Nessie Vinylcleaner Pro the extraction turbine of the Nessie Vinylmaster including extraction electronics is installed, according to the magazine "Stereo" the quietest. If the drying arm is swiveled onto the plate, the suction begins and all dissolved impurities are pulled deep out of the groove. The suction ends automatically after 1 rotation change. The usual "residual strip" of many surface vacuum cleaners does not exist with the Nessie Vinylcleaner Pro.
The sound insulation is completely carried out in Basotect. Due to the electronic control of the suction turbine and the sound insulation, the device is extremely quiet.


The start button is located on the front of the device and is equipped with a blue LED. If the start button is pressed, an electronic timer runs and measures the washing time. After the minimum washing time has elapsed, the LED flashes and the suction process is released. Of course, the user can continue washing. However, the timer is a helpful orientation, especially if you wash several records in a row.


The standard scope of delivery includes equipment for washing LPs. An inexpensive accessory set is available for washing singles and 10 inch LPs.
The direction of rotation of the turntable changes automatically. This creates a dynamic washing operation.


The Nessie Vinylcleaner Pro is protected against electrostatic charges several times, including by grounding the plate mandrel and metal supports as well as by an antistatic turntable support.


The device is manufactured in qualified manufactory work in Germany. The case is made of raven black 8 mm high-gloss acrylic, the turntable of satin-finished acrylic "snow". The high-quality look of the Nessie Vinylcleaner Pro is underlined by elegant chrome and stainless steel elements.


Also unique in this class is the noble puck made of hard chrome-plated aluminum. It has a rubber lip seal at the bottom, which protects the label from moisture during washing. It is simply placed on the plate without annoying screwing.

Nessie Vinylcleaner Basic

 

The Nessie Vinylcleaner Basic is a high-quality record washing machine manufactured in Germany. It is reliable and used worldwide by vinyl listeners. The Nessie Vinylcleaner Basic has all the functions necessary for optimal record washing.


The heart of the Nessie Vinylcleaner Basic is the extraction technology of its big brother, the "Nessie Vinylmaster". The same elements are installed and no compromises are made. The electronic control of the regulated extraction also corresponds to that in the Vinylmaster. The contact pressure during extraction is therefore never too high. This is a common problem of "powerful" machines from the Far East.


The case is made of 8 mm deep black acrylic and the turntable is made of satin acrylic. Chrome-plated design and functional elements make the machine a real eye-catcher.


Also unique in this class is the noble puck made of hard chrome-plated aluminum. It has a rubber lip seal at the bottom, which protects the label from moisture during hand washing. It seals without screws or clamps only by its own weight.
With the Nessie Vinylcleaner Basic, the cleaning fluid (Nessie Vinylin) is applied manually and the record is washed with a Nessie premium brush. The in-house cleaning agent "Vinylin" is supplied in a practical 200 ml spray bottle, which allows easy dosing of the cleaning solution. The automatic change of direction of rotation supports the high cleaning effect.


The direction of rotation of the turntable changes automatically every 2 revolutions. This results in a dynamic washing operation without the user having to operate switches.


If the drying arm is put onto the plate, the suction begins and all dissolved impurities are pulled deep out of the groove. The suction power adjusts automatically. The suction ends automatically after 1 rotation change. The usual "residual strip" of many surface vacuum cleaners does not exist with the Nessie Vinylcleaner Basic.


The device is manufactured in qualified manufactory work in Seevetal near Hamburg. The housing is made of deep black carbon acrylic. The high-quality look is underlined by elegant chrome and stainless steel elements.


Protection against electrostatics
The Nessie Vinylcleaner Basic is protected against electrostatic charges in several ways, e.g. by grounding the plate mandrels, the side metal supports and an antistatic turntable support. The cleaning liquid "Vinylin" is also antistatic.
The devices are equipped with an LED illuminated button, which indicates the recommended minimum washing time via a timer. So you always use the right washing time even with several plates.


The devices are fully equipped with sound insulation made of Basotect, a high-quality sound insulation material from Bayer. This reduces the noise of the turbine to values below 60 dB.


As an accessory, the Nessie premium brush article 86200 is supplied free of charge. The brush is made of the finest, abrasion-free fibers in industrial quality. It is manufactured inustrially in a traditional company in the Black Forest.

 

Hannl Mera Professional

 

If you are looking for something solid and special, the Hannl Mera Professional could be the right choice for you. Based on a classic and bestseller, this machine has been completely redesigned and adapted to today's requirements.

Design
The housing of the HANNL Mera Professional is made of 10 mm black high-gloss carbon acrylic. Metal elements, such as the feet, the heavy puck, etc. are CNC machined and hard chrome plated. The side struts are anodized in either black or silver. They give the machine a timeless, high-quality design.

The HANNL round brush
The unique selling point of this high-quality machine is the patented HANNL round brush, which was developed by Günter Hannl. With the round brush a gentle deep cleaning of the record is achieved. Customers repeatedly report unique results on otherwise abandoned records. Watch our video on this page.

Individual setting options
Traditionally, the Hannl Mera is appreciated by vinyl lovers because it allows individually adjustable record washing. This concept has been retained. With the Hannl Mera Professional you can adjust the dosing quantity, the speed of the turntable and also the performance of the extraction turbine to your personal needs. You can even adjust the brightness of the LED indicator to suit your comfort and disable acoustic signals. And best of all, your machine remembers your preferences and automatically makes your settings available to you the next time you wash the plate. No other plate washing machine offers you such individuality!


The new automatic mode
The concept of individual record washing was supplemented by an automatic function in the course of the redesign. This makes the HANNL Mera Professional an all-rounder. In automatic mode, a defined amount of liquid is automatically dosed. A washing timer monitors the optimal washing time and reports when the initiation of the suction should be initiated. The drying process starts at the push of a button and also ends automatically after a rotation change. The practical LED bar display shows you the respective progress. With the automatic mode, a rapid processing of larger collections is considerably simplified.




Engage with our audio specialist Martin Ng for more information on our price and services.

BACK TO TOP